Product Model:HY-40R204
Modulation Mode:GFSK
Antenna Type: PCB antennas, ceramic antennas, IPEX, wire antennas
Bluetooth BLE 5.0 single mode compliant
Transmission Distance:80M(The actual distance is subject to the test environment)
Integrated Bluetooth low energy stack
GAP, GATT, L2CAP, SMP Bluetooth low energy profiles
Compliance: BQB BLE5.0, FCC, IC(Canada), CE ETSI RED…etc. worldwide RF Regulations.
Transmit power :-21dBm~+5dBm typical
Receiver sensitivity: -97dBm typical
In-System-Programmable Flash 128KB SRAM 8KB
10 programmable GPIO
Programmable ARM Cortex-M3 processor for embedding full applications
Low current consumption :Shutdown. No clocks running, no retention: 150nA(Typical)
Datasheet
- 2019-09-17 HY-40R204 16p BLE 5.0 Module spec.V2.3
Sepcification
Description
HY-40R204 integrates all features required for a Bluetooth Low power aplication ,which is a highly integrated Bluetooth 5.0 module targeted for low power Smart Devices and loT applications. HY-40R204 also provides 10 programmable GPIO for low power product applications and provides selection of PCB antennas, ceramic antennas, IPEX, wire antennas.
HY-40R204 offers all Bluetooth low energy features: radio, stack, profiles and application space for customer applications. The module also provides flexible hardware interfaces to connect sensors.
HY-40R204 can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries.
in lowest power shutdown mode it consumes only 0.15uA and will wake up in few microseconds.
HY-40R204 transmission distance of 100meter or more. (At face to face, free space, 1.2 Meter high from Ground for testing).
Bluetooth IC:TTC2640R2 4*4*0.9mm 32pin IC,Used TI CC2640R2 die chip
Radio performance & current consumption
(Test condition:With Ta = 25 ℃, VDD =3.0V, with internal DC-DC converter, standardmeasure:1Mbps GFSKmodulation ,FRF = 2440MHz Bluetooth Low energy mode.)
Modulation Mode: GFSK
Frequency range: 2402~2480MHZ (2.4GHz ISM band)
Transmit power setting Range: -21 ~ +5 dBm typical ( IC differential mode point characteristics; programmable by software) .
The antenna feed point transmit power : +2 dBm typ. (TX set Max.output characteristics)
Receiver sensitivity: -97dBm typical( IC differential mode point characteristics)
The antenna feed point receiver sensitivity : -93 dBm typical. ( PER <30.8%)
Frequency drift specification :RF ± 60ppm , MCU clock 32.768KHz ± 350ppm.( Use X-Tal)
Pre-certified RF regurations for BQB BLE 4.2/5.0, CE ETSI RED, FCC, IC(Canada), (FCC and IC only for HY-40R204PC PCB antenna with shield case model);
Another can Compliance for worldwide RF Regulations.
Ultra low current consumption
Transmit:6.1mA(typical)(O/P Power setting :0dBm)
Transmit:9.1mA(typical)(O/P Power setting :5dBm)
Receive(high gain setting): 6.1 mA(typical)
Idle. Supply Systems and RAM powered:550uA(Typical)
Standby. With Cache, RTC, CPU, RAM and partial register retention. XOSC_LF: 3.0 uA(Typical)
Shutdown. No clocks running, no retention: 150 nA(Typical)