Bluetooth 4.0 BLE module HY254104 V7

Product model: HY-254104 V7

Modulation mode: GFSK

Bluetooth BLE 4.0 single mode compliant

Role type (master-slave): master,slave,master and slave

Antenna type: Metal wire antenna

Size: 15.2*25.3*2.0 mm

Communication interface: UART

Safety certification: BQB BLE4.0, FCC, IC(Canada), CE ETSI RED…etc. worldwide RF  Regulations.

Transmission distance: 35 meters (the actual distance is subject to the test environment)

Working voltage: 2.0-3.6V DC

Transmit power :+0dBm typical

Receiver sensitivity: 94dBm typical

In-System-Programmable Flash 256KB SRAM 8KB

Working mode: Host mode / Slave mode / Broadcast mode (Beacon)

Customer support center



HY-254104 Bluetooth low energy UART protocol module is a single mode device targeted for low  power sensors and accessories.

HY-254104 offers all Bluetooth low energy features: radio, stack, profiles and application space for  customer applications. The module also provides flexible hardware interfaces to connect sensors.  

HY-254104 can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries. in  lowest power shutdown mode it consumes only 0.5 uA and will wake up in few microseconds.

HY-254104 transmission distance of 50 meter. (At face to face, free space, 1.2 Meter high from  Ground for testing).

Bluetooth IC:TTC2541 6*6*0.9mm 40pin IC / use TI CC2541 IC dice

Electrical Characteristics

 (With Ta = 25 ℃, VDD = 3.0V, standard measure:1Mbps , 250KHz GFSK modulation ,  Bluetooth Low energy mode.)

1. Modulation Mode: GFSK;

2. Frequency range: 2402~2480MHZ (2.4G ISM band);

3.Transmit power setting Range: -20 ~ +0 dBm typical ( differential mode o/p point characteristics ;  programmable by software)

4. Operating ambient temperature range: -40 ℃ ~ + 125 ℃;

5. The storage temperature range: -40 ℃ ~ + 85 ℃;

6. The power supply voltage: 2.0 ~ 3.6VDC;

7. Receiver sensitivity: - 94dBm typical( direct test from IC RF out differential mode o/p point  characteristics)

8. Receiving mode current (high gain setting): 20.02 mA (typical);

9. Transmit mode current ( at 0dBm output setting ): 18.2 mA (typical);

10. MCU law active current (only 32MHz operation of X-tal OSC): 6.7 mA (typ);

11. Power mode 1: The current consumption: (under MCU standby mode,   the wake-up time = 4uS); I= 270uA (Typical);

12. Power mode 2: THE current consumption in sleep mode. timer activate / enable, wake-up time can by the programming software setting): I = 1uA (typ);

13. Power mode 3: The current consumption :( Low power deep sleep mode,  via the hardware initiative wake ): I = 0.5uA(Typical)



HY-254104 V7 low-power Bluetooth module (single mode) can work in the master/slave/master-slave switching role, both support bridge mode (transparent mode) and direct drive mode. Under normal circumstances, the UART external MCU can be used. , transparent transmission of data;

HY-254104 V7 ultra-small size, support for secondary development, can be embedded in the complete application, Shengrun Technology provide the corresponding development kit.

Contact us

Thank you for your interest in TTCIOTSDK.Please fill in the following information and a representative will contact you to answer questions and provide the information you request within 24 hours.

Copyright © 2019 TTCIOTSDK Corporation All right reserved.